Tamagawa Electronics Vietnam

We always seeked products in highest quality

MIMO POI

Feature:

The POI for Active DAS. This product can control the input level of the DAS equipment, and the level can be adjusted from the attenuator on the front panel. It has a function of attenuation of 41 dB at the maximum and it is an optimum POI for ACTIVE DAS system for IBS base station.

Application:

  • Telecommunication purpose
  • IBC/IBS
  • Subway, underground, airport

Description

Specification 

NO COLUMN FREQUENCY
1 Frequency Band LTE 1800MHz
LTE 2600MHz
Passband is permitted within 10% of above each frequency band
Port 1 and Port2 must not be same Pass band frequency.
Please choose the radio band to 13% of pass band frequency.
2 Insertion Loss TX/RX→TX: 25dB max RX→TX/RX: 10dB Max
3 V.S.W.R 1.3 max
4 Isolation Inter Bands 50dBc min
Level adjust To DAS TX for A&B port 1 to 41dB att To BTS RX for A&B port 1 to 41dB att
5 Impedance 50Ω All ports
6 Average Maximum Power 30W max. per input port (TX/RX1, TX/RX2)
1W max. per input port (TX1, TX2, RX1, RX2)
7 Operating Temperature -10°C to + 50°C
8 Storage Temperature -20°C to + 60°C
9 Relative Humidity 0~95% non-condensing
10 RoHS Applicant complied
11 Dimensions 88x482x450 mm (Height x Width x Depth)
12 Connector BTS SIDE N-FEMALE DAS SIDE N-FEMALE
13 Mounting 2U x19 inch rack mounted

Reviews

There are no reviews yet.

Be the first to review “MIMO POI”

Your email address will not be published. Required fields are marked *